|
تفاصيل المنتج:
اتصل
تحدث الآن
|
| حساسية: | حساسية | Frequency Response: | 4.5 to 2,000 Hz (270 to 120,000 cpm) ±3.0 dB, 6.0 to 1,000 Hz (360 to 60,000 cpm) ±0.9 dB. |
|---|---|---|---|
| Weight: | 156 g (5.5 oz), typical | القطر: | 28 ملم (1.1 بوصة) |
| ارتفاع: | 73.1 ملم (2.88 بوصة) | مادة الحالة: | 316L من الفولاذ المقاوم للصدأ |
| Connector: | 2-pin Mil-C-26482 hermeticallysealed, 316L stainless steel shell. | Mounting Torque: | 45 N-m (33 ft-lb) maximum |
| إبراز: | 4.5Hz bently nevada vibration sensor,bently nevada vibration sensor 330525-CN,330525-00,bently nevada vibration sensor 330525-CN,330525-00 |
||
| Sensitivity | Sensitivity |
| Frequency Response | 4.5 to 2,000 Hz (270 to 120,000 cpm) ±3.0 dB, 6.0 to 1,000 Hz (360 to 60,000 cpm) ±0.9 dB |
| Weight | 156 g (5.5 oz), typical |
| Diameter | 28 mm (1.1 in) |
| Height | 73.1 mm (2.88 in) |
| Case Material | 316L stainless steel |
| Connector | 2-pin Mil-C-26482 hermetically sealed, 316L stainless steel shell |
| Mounting Torque | 45 N-m (33 ft-lb) maximum |
The Velomitor XA (eXtended Application) Sensor is a ruggedized version of Bently Nevada's 330500 Velomitor Sensor. Its 316L stainless steel case and unique, weatherproof connector and cable assembly permit mounting without a housing. The Velomitor XA Sensor cable assembly is suitable for use in moist environments, and the Velomitor XA Sensor design meets the requirements of IP-65 and NEMA 4X dust ratings when properly installed with a mating extension cable.
| 00 | None Required |
| 01 | CSA/NRTL/C |
| 02 | SIRA/CENELEC |
| Minimum length | 1 meter (3.3 feet) |
| Maximum length | 25 meters (82 feet) |
Order in increments of 3 meters.
| 00 | No fittings supplied |
| 01 | One ¾ NPT fitting |
| 02 | Two ¾ NPT fittings |
| 100076 | 330500/330525 Velomitor Sensor and Velomitor XA Sensor User Guide |
| 02173007 | Bulk cable; two-conductor twisted, shielded. 22 AWG cable without connectors or terminal lugs. Specify length in feet. |
| 103537-01 | Terminal Mounting Block. Provides simple field wiring connection and can be mounted inside any standard Proximitor Sensor housing. One terminal mounting block is needed for each Velomitor XA Sensor connection. |
| 03839144 | Splash-resistant boot cover for interconnect cable assembly. The boot is made from fluorosilicone elastomer. Boot color is blue. |
| 03839142 | Bottom clamp used to secure the boot to the Velomitor XA Sensor case. |
| 03839143 | Top clamp used to secure the boot to the interconnect cable assembly. |
اتصل شخص: Ms. Joy chen
الهاتف :: +8615012673027
الفاكس: 86--15012673027
