|
Product Details:
Contact Now
Chat Now
|
| Switching Function: | Complementary | Output Type: | PNP |
|---|---|---|---|
| Output Polarity: | DC | Amplifier Housing: | Stainless Steel |
| Cable Length: | L = 15 M | Dimensions: | 40mm*44mm*56mm |
| Highlight: | ncn25 inductive sensor pnp,p and f sensors ncn25,pnp p and f sensors |
||
| Attribute | Value |
|---|---|
| Switching function | Complementary |
| Output type | PNP |
| Output polarity | DC |
| Amplifier housing | Stainless steel |
| Cable length | L = 15 m |
| Dimensions | 40mm × 44mm × 56mm |
| Parameter | Value |
|---|---|
| Rated operating distance (sn) | 25 mm |
| Installation | Flush mountable |
| Assured operating distance (sa) | 0 ... 20 mm |
| Reduction factor rAl | 0.5 |
| Reduction factor rCu | 0.5 |
| Reduction factor r304 | 0.6 ... 1 |
| Output type | 4-wire |
| Mounting angle | Al |
| Operating voltage (UB) | 10 ... 30 V |
| Switching frequency (f) | 0 ... 20 Hz |
| Hysteresis (H) | 0.3 ... 5 typ. 2 % |
| Reverse polarity protection | Reverse polarity protected |
| Short-circuit protection | Pulsing |
| Voltage drop (Ud) | ≤ 3 V |
| Operating current (IL) | 0 ... 200 mA |
| No-load supply current (I0) | ≤ 25 mA |
| Time delay before availability (tv) | ≤ 20 ms |
| Switching state indicator | Multihole-LED, yellow |
| MTTFd | 7515 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Standard conformity | EN IEC 60947-5-2 |
| UL approval | cULus Listed, General Purpose, Class 2 Power Source |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient temperature | 0 ... 250 °C (32 ... 482 °F) |
| Connection type | Connector plug M12 x 1, 4-pin |
| Cable version | PFA cable, with armour of stainless steel |
| Core cross section | 3 x 0.34, screened |
| Housing material | PTFE / Al / 1.4305 / AISI 303 |
| Sensing face | PTFE |
| Degree of protection | Amplifier IP67, sensor IP40 |
Contact Person: Ms. Joy chen
Tel: +8615012673027
Fax: 86--15012673027