China Bently Nevada Vibration Monitoring System

• 

  Bently Nevada 3300 XL NSv Proximitor Sensor 330980-71-CN 7m Panel Mount

  Manufacturer:Bently Nevada

  Part No:330980-71-CN

  Length:7.0 meters (23.0 feet)

  Chat Now
• 

  Bently Nevada 177230 Seismic Transmitter 316L Stainless Steel

  Weight:131 g (4.62 oz), typical

  Diameter:25.4 mm (1.00 in)

  Height:66.0 mm (2.60 in)

  Chat Now
• 

  Bently Nevada 3300 XL 50mm Proximitor Sensor with Gold-Plated Connector

  Proximitor Sensor Material:A380 aluminum

  Sliding Bracket Material:Anodized aluminum and stainless steel

  System Length:5 or 9 metres including extension cable

  Chat Now
• 

  Bently Nevada 9200 Seismoprobe Velocity Transducer 20 mV/mm/s Sensitivity

  Sensitivity:20 mV/mm/s (500 mV/in/s), ±5% when properly terminated and oriented at the angle of calibration.

  Calibration Load:10 kΩ Terminal "A" to "B" Output taken across pins "A" and "B"

  Sensitivity Temperature Coefficient:0.2%/°C

  Chat Now
• 

  Bently Nevada 2300/20-00 Vibration Monitor 18-36Vdc

  DC Input:18~36 Vdc, max 7.5 W

  Configurable Bandpass filter:0.2 Hz to 20 kHz

  ScalFactor range:5 to 1000 mV/g

  Chat Now
• 

  Bently Nevada 200155 Vibration Accelerometer for Machinery Monitoring

  Used with ProTIM Option:Low Frequency Accelerationto-Velocity channel type (- 05)

  Type of Application:Fin-Fan, slow rotating shafts

  Measurement Range in m/s2 (g):±196 (±20)

  Chat Now
• 

  Bently Nevada PROXPAC XL Proximity Transducer Assembly 330880 with 3300 XL 8mm Probe

  Proximitor Sensor Input:3300 XL 8 mm Proximity Probe with a 1-metre cable length installed in the probe sleeve

  Output resistance:50 Ω

  Probe Case Material:AISI 304 stainless stee

  Chat Now
• 

  Bently Nevada 330980-50-00 Proximitor Sensor 5.0m Panel Mount

  Manufacturer:Bently Nevada

  Part No:330980-50-00

  Length:5.0 meters (16.4 feet)

  Chat Now
• 

  Bently Nevada 330500 Shielded Two-Conductor Interconnection Cable

  Cable Type:Two-conductor twisted

  shielded or not:shielded

  Moisture-proof:two-socket moisture

  Chat Now
• 

  Bently Nevada 330380-90-00 3300 XL 16mm High Temp Proximitor Sensor

  Manufacturer:Bently Nevada

  Part No:330380-90-00

  Total Length:9 meter

  Chat Now
• 

  Bently Nevada PROXPAC XL Proximity Transducer Assembly 330880 with 8mm Probe

  Proximitor Sensor Input:3300 XL 8 mm Proximity Probe with a 1-metre cable length installed in the probe sleeve.

  Power:Requires -17.5 Vdc to -26 Vdc without barriers at 12 mA maximum consumption, -23 Vdc to -26 Vdc with barriers. Operation at a more positive voltage than -23.5 Vdc can result in reduced linear range.

  Supply Sensitivity:Less than 2 mV change in output voltage per volt change in input voltage.

  Chat Now
• 

  Bently Nevada 165855 Cylinder Pressure Transducer 0-689 Bar

  Measurement Range:0 to 100/ 250/ 500/ 1000/ 2500/ 5000/ 10,000 psia 0 to 6.8/ 17/ 34.5/ 69/172/ 345/ 689 bar

  Proof (Over) Pressure:1.5X Full Scale

  Burst Pressure:3X Full Scale (2X FS on 689 bar/ 10,000 psia units)

  Chat Now