China Bently Nevada Vibration Monitoring System

• 

  Bently Nevada 3300 XL 8mm Vibration Transmitter 330130-040-01-00

  Proximitor Sensor Input:Accepts one non-contacting 3300-series 5 mm, 3300 XL 8 mm Proximity Probe and Extension Cable.

  Power:Requires -17.5 Vdc to -26 Vdc when installed with nonincendive circuit connected per installation drawing 140979 at 12 mA maximum consumption, -23 Vdc to -26 Vdc with barriers. Operation at a more positive voltage than -23.5 Vdc can result in reduced linea

  Supply Sensitivity:Less than 2 mV change in output voltage per volt change in input voltage.

  Chat Now
• 

  Bently Nevada TK-3E Vibration Monitoring Test Kit 177313-01-01-00

  Electric:95-125 Vac, 50/60 Hz, 1A minimum 190-250 Vac, 50/60 Hz, 1A minimum

  Air:90 psi (6.2 bar) maximum

  Vibration Amplitude Range::50 μm to 254 μm (2 to 10 mils) peak-to-peak.

  Chat Now
• 

  Bently Nevada 330525 Velomitor XA Vibration Sensor 4.5Hz

  Sensitivity:Sensitivity

  Frequency Response:4.5 to 2,000 Hz (270 to 120,000 cpm) ±3.0 dB, 6.0 to 1,000 Hz (360 to 60,000 cpm) ±0.9 dB.

  Weight:156 g (5.5 oz), typical

  Chat Now
• 

  Bently Nevada 3300 XL NSv Proximitor Sensor A380 Aluminum 5m System

  Probe Tip Material:Polyphenylene sulfide (PPS)

  Probe Case Material:AISI 304 stainless steel (SST).

  Proximitor Sensor Material:A380 aluminum

  Chat Now
• 

  Bently Nevada 3300 XL 8mm ETR Reverse Mount Probe 330195-02-12-05-00

  Proximitor Sensor Input:Accepts one non-contacting 3300-series 5 mm, 3300 XL 8 mm Proximity Probe and Extension Cable.

  Supply Sensitivity:Less than 2 mV change in output voltage per volt change in input voltage.

  Output Resistance:50 Ω

  Chat Now
• 

  Bently Nevada 3300 NSv Extension Cable 6m 1.5mm Linear Range

  Length:6m(19.7inch)

  Extension cable dc resistance:Center conductor: 0.220 Ω/m (0.067 Ω/ft) Shield: 0.066 Ω/m (0.020 Ω/ft)

  Extension cable capacitance:69.9 pF/m (21.3 pF/ft) typical

  Chat Now
• 

  Bently Nevada AM3100T2-Z0 IEPE Accelerometer 100 mV/g Top Exit

  Cable exit:Top exit sensor

  Sensitivity:100 mV/g

  Accel range:± 80 g

  Chat Now
• 

  Bently Nevada 43501 Low Pressure Cable Seal 1/2-14 NPT

  High Pressure Side Thread Size:1/2-14 NPT

  Cable Grommet and Washer 0 0 Solid grommet (:Grommet will accommodate up to 4 cables. One hole is punched and three are partially predrilled.

  Low Pressure Side Thread Size:1/2-14 NPT

  Chat Now
• 

  Bently Nevada 3300 XL NSv Proximitor Sensor 330980-71-CN 7m Panel Mount

  Manufacturer:Bently Nevada

  Part No:330980-71-CN

  Length:7.0 meters (23.0 feet)

  Chat Now
• 

  Bently Nevada 177230 Seismic Transmitter 316L Stainless Steel

  Weight:131 g (4.62 oz), typical

  Diameter:25.4 mm (1.00 in)

  Height:66.0 mm (2.60 in)

  Chat Now
• 

  Bently Nevada 3300 XL 50mm Proximitor Sensor with Gold-Plated Connector

  Proximitor Sensor Material:A380 aluminum

  Sliding Bracket Material:Anodized aluminum and stainless steel

  System Length:5 or 9 metres including extension cable

  Chat Now
• 

  Bently Nevada 9200 Seismoprobe Velocity Transducer 20 mV/mm/s Sensitivity

  Sensitivity:20 mV/mm/s (500 mV/in/s), ±5% when properly terminated and oriented at the angle of calibration.

  Calibration Load:10 kΩ Terminal "A" to "B" Output taken across pins "A" and "B"

  Sensitivity Temperature Coefficient:0.2%/°C

  Chat Now