|
उत्पाद विवरण:
संपर्क करें
अभी चैट करें
|
| चैनलों की संख्या: | एक | प्रतिरोध स्रोत: | 2-, 3-, या 4-तार* आरटीडी से बीएस 1904/डीआईएन 43760 (0 डिग्री सेल्सियस पर 100Ω) *उपयोगकर्ता स्विच द्व |
|---|---|---|---|
| प्रतिरोध सीमा: | 10Ω से 400Ω | आउटपुट कॉन्फ़िगरेशन: | 2, 3 या 4 तार (खतरनाक क्षेत्र टर्मिनलों के लिए चयनित मोड से स्वतंत्र) |
| एलईडी सूचक: | हरा: शक्ति संकेत | इकाई के भीतर अधिकतम बिजली अपव्यय: | 24V पर 0.8W, 35V पर 1.0W |
| प्रमुखता देना: | MTL5582B Resistance Isolator,400ohm MTL Safety Barrier,10ohm MTL Safety Barrier |
||
| Number of channels | One |
|---|---|
| Resistance source | 2-, 3-, or 4-wire* RTDs to BS 1904/DIN 43760 (100Ω at 0°C) *user selectable by switches (factory set for 3-wire) |
| Resistance range | 10Ω to 400Ω |
| Output configuration | 2, 3 or 4 wires (independent of mode selected for hazardous area terminals) |
| LED indicator | Green: power indication |
| Maximum power dissipation within unit | 0.8W at 24V 1.0W at 35V |
The MTLx582B connects to a 2-, 3-, or 4-wire resistance temperature device (RTD) or other resistance located in a hazardous area, isolates it and repeats the resistance to a monitoring system in the safe area. The module is intended typically (but not exclusively) for use with Pt100 3-wire RTDs. Switches enable selection of 2-, 3-, or 4-wire RTD connection.
The MTLx582B should be considered as an alternative, non-configurable MTLx575, for use in RTD applications where a resistance input is preferred or needed instead of 4/20mA. The design is notable for its ease of use and repeatability. The number of wires which can be connected on the safe-area side of the unit is independent of the number of wires which can be connected on the hazardous-area side. The module drives upscale in the case of open circuit detection.
व्यक्ति से संपर्क करें: Ms. Joy chen
दूरभाष: +8615012673027
फैक्स: 86--15012673027
