10ohm To 400ohm MTL5582B Resistance Isolator
Product Attributes
| Number of channels |
One |
| Resistance source |
2-, 3-, or 4-wire* RTDs to BS 1904/DIN 43760 (100Ω at 0°C) *user selectable by switches (factory set for 3-wire) |
| Resistance range |
10Ω to 400Ω |
| Output configuration |
2, 3 or 4 wires (independent of mode selected for hazardous area terminals) |
| LED indicator |
Green: power indication |
| Maximum power dissipation within unit |
0.8W at 24V 1.0W at 35V |
Product Description
MTL5582B RESISTANCE ISOLATOR
The MTLx582B connects to a 2-, 3-, or 4-wire resistance temperature device (RTD) or other resistance located in a hazardous area, isolates it and repeats the resistance to a monitoring system in the safe area. The module is intended typically (but not exclusively) for use with Pt100 3-wire RTDs. Switches enable selection of 2-, 3-, or 4-wire RTD connection.
The MTLx582B should be considered as an alternative, non-configurable MTLx575, for use in RTD applications where a resistance input is preferred or needed instead of 4/20mA. The design is notable for its ease of use and repeatability. The number of wires which can be connected on the safe-area side of the unit is independent of the number of wires which can be connected on the hazardous-area side. The module drives upscale in the case of open circuit detection.
Specification
Location of RTD: Zone 0, IIC, T4 hazardous area
Div. 1, Group A, hazardous location
Resistance source: 2-, 3-, or 4-wire* RTDs to BS 1904/DIN 43760 (100Ω at 0°C) *user selectable by switches (factory set for 3-wire)
Resistance range: 10Ω to 400Ω
RTD excitation current: 200μA nominal
Output configuration: 2, 3 or 4 wires (independent of mode selected for hazardous area terminals)
Output range: 10Ω to 400Ω (from a 100μA to 5mA source)
Temperature drift: ±10mΩ/°C typical (0.01%/°C @ 100Ω)
Response time: To within 4% of final value within 1s
Safety drive on open-circuit sensor: Upscale to 420Ω nominal
Transfer accuracy @20°C: <0.15Ω at excitation current 1 - 5mA
<0.25Ω at excitation current 0.5 - 1mA
LED indicator: Green: power indication
Power requirements, Vs: 33mA at 24V
35mA at 20V
28mA at 35V
Maximum power dissipation within unit: 0.8W at 24V
1.0W at 35V
Safety description: Terminals 1 and 3
Uo = 1.2V Io = 4mA Po = 1.2mW Um = 253V rms or dc
Non-energy-storing apparatus ≤ 1.5V, ≤ 0.1A, ≤ 25mW; can be connected without further certification into any IS loop with an open circuit voltage < 5V.
Terminals 1, 3, 4 and 5
U = 6.51V I = 10mA P = 17mW
Related Part Numbers
MTL5521
MTL4546Y
MTL7761PAC
MTL5522
MTL4549Y
MTL7765AC
MTL5531
MTL4573
MTL7787+
MTL5532
MTL4575
MTL7787P+
MTL5541
MTL4646Y
MTLCPS16
MTL5541S
MTL4850
NJ5-18GK-N
MTL5544
MTL4851
SD150X
MTL5544D
MTL4852
SD32
MTL5546
MTL5018
SD32X
MTL5546Y
MTL5032
SDRTD
MTL5561
MTL5042
SLP32D
MTL5573
MTL5044
TP48-3-I-NDI
MTL5575
MTL5049
TP48-3-N-NDI
MTL5582B
MTL5511
TP48-4-I-NDI
MTL7728+
MTL5514D
TP48-4-N-NDI
MTL7756AC
MTL5516
TP48-N-NDI
MTL7760AC
MTL5516C
ZB24571
ข้อความของคุณจะต้องอยู่ระหว่าง 20-3,000 ตัวอักษร!
