خانه محصولاتmtl موانع ایمنی

MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas

چت IM آنلاین در حال حاضر

MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas

MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas
MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas

تصویر بزرگ :  MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas

جزئیات محصول:
محل منبع: ایالات متحده آمریکا
نام تجاری: MTL
گواهی: CE
شماره مدل: MTL5532
پرداخت:
مقدار حداقل تعداد سفارش: 1 قطعه
قیمت: قابل مذاکره
جزئیات بسته بندی: بسته بندی کارتن استاندارد
زمان تحویل: در صورت درخواست
شرایط پرداخت: T/T
قابلیت ارائه: 100 قطعه در هر ماه
مخاطب حالا صحبت کن

MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas

شرح
تعداد کانال ها: یکی، کاملا شناور نوع سنسور: یک سوئیچ یا آشکارساز نزدیکی (NAMUR/BS EN 60947 ¥5 ¥6:2001) 2 ¥ یا 3 ¥ فرستنده ولتاژ یا پالس سیم
محل سوئیچ: منطقه 0، IIC، T6 منطقه خطرناکی Div. 1، گروه A، محل خطرناکی خروجی زنگ هشدار: رله روشن در زنگ هشدار، حداکثر 0.5A @ 35Vdc.
نشانگر LED: سبز: نشانگر برق زرد: روشن وقتی مدار خروجی روشن است قرمز: چشمک می زند در صورت خطا یا خطا محدوده فرکانس: 0 - 50 کیلوهرتز - حالت خروجی پالس 0 - 10 کیلوهرتز - برای خروجی آنالوگ
برجسته کردن:

0.5A MTL Safety Barrier,50kHz MTL Safety Barrier,MTL5532 pulse isolator 35Vdc

,

50kHz MTL Safety Barrier

,

MTL5532 pulse isolator 35Vdc

0 – 50kHz MTL Safety Barrier MTL5532 Pulse Isolator 35Vdc
Key Specifications
Attribute Value
Number of channels One, fully floating
Sensor type Switch or proximity detector (NAMUR/BS EN 60947–5–6:2001) 2– or 3–wire voltage or pulse transmitter
Location of switch Zone 0, IIC, T6 hazardous area Div. 1, Group A, hazardous location
Alarm output Relay ON in alarm, 0.5A @ 35Vdc max.
LED indicator Green: power indication
Yellow: on when output circuit is on
Red: flashing when line fault or error
Frequency range 0 – 50kHz - pulse output mode
0 – 10KHz - for analogue output
Product Overview

The MTL5532 Pulse Isolator safely isolates pulses from switches, proximity detectors, current pulse transmitters, or voltage pulse transmitters located in hazardous areas. Designed for applications requiring high pulse rates and fast response times, it accurately repeats pulses into safe areas while providing an analogue output proportional to frequency and configurable alarm relay output.

Detailed Specifications
Input Characteristics
Switch input: Output ON if switch is closed
Proximity detector input: Excitation: 7.0 to 9.0V dc from 1kΩ nominal
Current pulse input: Transmitter supply: 16.5V dc at 20mA
Voltage pulse input: Input impedance: > 10kΩ
Output Characteristics
Safe-area pulse output: Maximum delay: 10µs
Safe-area current output: Signal range: 4 to 20mA
Alarm output: Relay ON in alarm, 0.5A @ 35Vdc max.
Performance
Pulse width: High: 10µs min, Low: 10µs min
Frequency range: 0 - 50kHz (pulse output), 0 - 10KHz (analogue)
Power Requirements
Current draw: 65mA at 24V dc, 70mA at 20V dc, 55mA at 35V dc
Power dissipation: 1.35W maximum at 24V, 1.75W maximum at 35V
Configuration

Requires a personal computer running MTL PCS45 software with PCL45USB serial interface for configuration.

Related Part Numbers
HCU16
MTL5521
MTL4546Y
MTL7761PAC
HCU3700
MTL5522
MTL4549Y
MTL7765AC
HM64RIB20-1.0
MTL5531
MTL4573
MTL7787+
HM64RIB20-1.5
MTL5532
MTL4575
MTL7787P+
HMM64
MTL5541
MTL4646Y
MTLCPS16
MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas 0

اطلاعات تماس
SC Automation Limited

تماس با شخص: Ms. Joy chen

تلفن: +8615012673027

فکس: 86--15012673027

ارسال درخواست خود را به طور مستقیم به ما (0 / 3000)

سایر محصولات