China MTL Safety Barrier

• 

  MTL5511 NAMUR Proximity Detector Interface 24V 25mA

  Number of channels:One

  Hazardous-area input:Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR)

  Safe-area output:Single pole relay with changeover contacts Note: reactive loads must be adequately suppressed

  Chat Now
• 

  MTL4544 Eaton-MTL Repeater Power Supply 2-Channel 4-20mA HART

  Number of channels:Two

  Signal range:4 to 20mA

  Safe-area circuit ripple:< 50µA peak-to-peak

  Chat Now
• 

  MTL4521/L MTL5521 Solenoid Alarm Driver 24V Output

  Number of channels:One

  Location of load:Zone 0, IIC, T4–6 hazardous area if suitably certified Div. 1, Group A hazardous location

  Input voltage:20 to 35V dc

  Chat Now
• 

  MTL4573 Temperature Converter for RTD 4-20mA Output Hazardous Area

  Number of channels:One

  Location of signal source:Zone 0, IIC, Hazardous area Division 1, Groups A-D, hazardous location

  RTD excitation current:200µA nominal

  Chat Now
• 

  MTL TP48-4-N-NDI Safety Barrier 20kA Surge Protection No Resistance

  Maximum surge current:20kA peak current (8/20µs waveform)

  Leakage current:Less than 1µA at max. working voltage

  Working voltage:35V dc maximum

  Chat Now
• 

  MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas

  Number of channels:One, fully floating

  Sensor type:Switch or proximity detector (NAMUR/BS EN 60947–5–6:2001) 2– or 3–wire voltage or pulse transmitter

  Location of switch:Zone 0, IIC, T6 hazardous area Div. 1, Group A, hazardous location

  Chat Now
• 

  MTL5082 Isolated Safety Barrier for RTD 10Ω to 400Ω Range

  Number of channels:One

  Location of RTD:Zone 0, IIC, T4 hazardous area Div 1, Group A hazardous location

  Resistance range:10Ω to 400Ω

  Chat Now
• 

  Eaton MTL HMS64 HART Backplane 64 Channel with 4 MTL4852 Capacity

  COMPATIBLE HART MUX:MTL4852 HART multiplexe

  ADDRESS SELECTIO:HART address switch

  CAPACITY:4 x MTL4852

  Chat Now
• 

  MTL5014 NAMUR Proximity Detector Interface for Hazardous Areas

  Number of channels:One

  Location of switches:Zone 0, IIC, T6 hazardous area Div. 1, Group A hazardous location

  Location of proximity detectors:Zone 0, IIC, T4–6 hazardous area if suitably certified Div. 1, Group A hazardous location

  Chat Now
• 

  MTL5044 IIC Isolated Safety Barrier for 4-20mA Signals

  Number of channels:Two

  Location of transmitters:Zone 0, IIC, T4–6 hazardous area if suitably certified Div. 1, Group A hazardous location

  Signal range::4 to 20mA

  Chat Now
• 

  MTL5516C Safety Barrier Switch Proximity Detector Interface 24V 35mA

  Number of channels:Two

  Location of switches:Zone 0, IIC, T6 hazardous area Div. 1, Group A hazardous location

  Hazardous-area inputs:Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR)

  Chat Now
• 

  MTL4531 Vibration Transducer Interface for Hazardous Areas

  Number of channels:One

  Sensor type:2- or 3-wire vibration transducer

  Signal range:Minimum –20V, maximum –0.5V

  Chat Now