China MTL Safety Barrier

• 

  HART MTL4541 Safety Barrier Repeater Power Supply for Hazardous Areas

  Number of channels:one

  Location of transmitte:Zone 0, IIC, T4–6 hazardous area if suitably certified Div. 1, Group A hazardous location

  Safe-area circuit ripple:< 50µA peak-to-peak

  Chat Now
• 

  MTL4546Y Isolating Driver 500Hz-10kHz 16V 20mA Hazardous Area

  Number of channels:one

  Location of I/P converter:Zone 0, IIC, T4–6 hazardous area if suitably certified Div. 1, Group A, hazardous location

  Digital signal bandwidth:500Hz to 10kHz

  Chat Now
• 

  MTL5544D 24V Repeater Power Supply for HART Transmitters

  Number of channels:One

  Temperature drift:< 0.8µA/°C

  Response time:Settles to within 10% of final value within 50µs

  Chat Now
• 

  MTL Safety Barrier TP48-3-N-NDI Surge Protection 20kA EN 61643-21

  Leakage current:Less than 1µA at max. working voltage

  Electrical Safety:To BS EN 61643-21 for surge protection devices

  Ambient temperature:-40°C to +85°C (-40°F to +185°F) (working) -40°C to +85°C (-40°F to +185°F) (storage)

  Chat Now
• 

  MTL5521 Solenoid Alarm Driver 20-35V DC Safety Barrier

  Number of channels:One

  Input voltage:20 to 35V dc

  Response time:Output within 10% of final value within 100ms

  Chat Now
• 

  MTL HCU16 HART Connection Unit Safety Barrier 0.5KG England

  Leading Time:On Request

  Dimensions:1.58 Cm X 10.98 Cm X 12.36 Cm

  Country Of Origin:England

  Chat Now
• 

  MTL5511 NAMUR Proximity Detector Interface 24V 25mA

  Number of channels:One

  Hazardous-area input:Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR)

  Safe-area output:Single pole relay with changeover contacts Note: reactive loads must be adequately suppressed

  Chat Now
• 

  MTL4544 Eaton-MTL Repeater Power Supply 2-Channel 4-20mA HART

  Number of channels:Two

  Signal range:4 to 20mA

  Safe-area circuit ripple:< 50µA peak-to-peak

  Chat Now
• 

  MTL4521/L MTL5521 Solenoid Alarm Driver 24V Output

  Number of channels:One

  Location of load:Zone 0, IIC, T4–6 hazardous area if suitably certified Div. 1, Group A hazardous location

  Input voltage:20 to 35V dc

  Chat Now
• 

  MTL4573 Temperature Converter for RTD 4-20mA Output Hazardous Area

  Number of channels:One

  Location of signal source:Zone 0, IIC, Hazardous area Division 1, Groups A-D, hazardous location

  RTD excitation current:200µA nominal

  Chat Now
• 

  MTL TP48-4-N-NDI Safety Barrier 20kA Surge Protection No Resistance

  Maximum surge current:20kA peak current (8/20µs waveform)

  Leakage current:Less than 1µA at max. working voltage

  Working voltage:35V dc maximum

  Chat Now
• 

  MTL5532 Pulse Isolator 0-50kHz for Hazardous Areas

  Number of channels:One, fully floating

  Sensor type:Switch or proximity detector (NAMUR/BS EN 60947–5–6:2001) 2– or 3–wire voltage or pulse transmitter

  Location of switch:Zone 0, IIC, T6 hazardous area Div. 1, Group A, hazardous location

  Chat Now