منزل المنتجاتحاجز السلامة

MTL5014 NAMUR Proximity Detector Interface for Hazardous Areas

ابن دردش الآن

MTL5014 NAMUR Proximity Detector Interface for Hazardous Areas

MTL5014 NAMUR Proximity Detector Interface for Hazardous Areas
MTL5014 NAMUR Proximity Detector Interface for Hazardous Areas MTL5014 NAMUR Proximity Detector Interface for Hazardous Areas MTL5014 NAMUR Proximity Detector Interface for Hazardous Areas MTL5014 NAMUR Proximity Detector Interface for Hazardous Areas

صورة كبيرة :  MTL5014 NAMUR Proximity Detector Interface for Hazardous Areas

تفاصيل المنتج:
مكان المنشأ: انجلترا
اسم العلامة التجارية: MTL
إصدار الشهادات: CE
رقم الموديل: MTL5014
شروط الدفع والشحن:
الحد الأدنى لكمية: 1 قطعة
الأسعار: قابل للتفاوض
تفاصيل التغليف: تعبئة الكرتون القياسية
وقت التسليم: عند الطلب
شروط الدفع: تي/تي
القدرة على العرض: 100pcs في الشهر
اتصل تحدث الآن

MTL5014 NAMUR Proximity Detector Interface for Hazardous Areas

وصف
عدد القنوات: واحد موقع المفاتيح: المنطقة 0، IIC، T6 منطقة خطرة Div. 1، المجموعة (أ) موقع خطير
موقع أجهزة كشف القرب: المنطقة 0، IIC، T4 ̇6 المنطقة الخطرة إذا تم اعتمادها بشكل مناسب Div. 1، المجموعة A الموقع الخطير مخرج المنطقة الآمنة: رلهان مع اتصالات التغيير
مدخلات المنطقة الخطرة: مدخل واحد يتوافق مع معايير NAMUR/DIN 19234 لأجهزة كشف القرب مدخل واحد يتوافق مع معايير NAMUR/DIN 19234 لأجهزة كشف القرب: 7.0 إلى 9.0 فولت من 1 كيلو أوم ± 10%
إبراز:

Hazardous Area Switch/Proximity Detector Interface,NAMUR Switch/Proximity Detector Interface,DIN 19234 Switch/Proximity Detector Interface

,

NAMUR Switch/Proximity Detector Interface

,

DIN 19234 Switch/Proximity Detector Interface

MTL5014 Switch/Proximity Detector Interface NAMUR/DIN 19234 Standards for Hazardous Area
Product Attributes
Attribute Value
Number of channels One
Location of switches Zone 0, IIC, T6 hazardous area Div. 1, Group A hazardous location
Location of proximity detectors Zone 0, IIC, T4–6 hazardous area if suitably certified Div. 1, Group A hazardous location
Safe-area output Two relays with changeover contacts
Hazardous-area input One input conforming to NAMUR/DIN 19234 standards for proximity detectors
Voltage specification 7.0 to 9.0V from 1kΩ ±10%
Product Description
The MTL5014 enables two safe-area loads to be controlled by a single switch or proximity detector located in the hazardous area. The safe-area interface has two changeover relays: output 1 and output 2. The output 1 relay reflects the status of the input and may be configured to operate in reverse phase. The output 2 relay may be configured either to repeat (slave) the output 1 relay, or to act as a line integrity monitor. A selectable line-fault-detect (LFD) facility enables an open- or short- circuit fault to be detected in the field wiring.
Related Models
MTL5014 NAMUR Proximity Detector Interface for Hazardous Areas 0

تفاصيل الاتصال
SC Automation Limited

اتصل شخص: Ms. Joy chen

الهاتف :: +8615012673027

الفاكس: 86--15012673027

إرسال استفسارك مباشرة لنا (0 / 3000)

منتجات أخرى