|
Detail produk:
Kontak
Chat Sekarang
|
| Jumlah Saluran: | Satu | Lokasi saklar: | Zona 0, IIC, T6 Area Berbahaya Div.1, Grup A, Lokasi Berbahaya |
|---|---|---|---|
| Lokasi detektor kedekatan: | Zona 0, IIC, T4–6 area berbahaya, jika disertifikasi sesuai Div.1, Grup A, lokasi berbahaya | Masukan area berbahaya: | Input yang sesuai dengan BS EN60947–5–6: 2001 Standar untuk Detektor Kedekatan (NAMUR) |
| Tegangan yang diterapkan pada sensor: | 7 sampai 9V DC dari 1kΩ ±10% | Output area aman: | dua, relai kutub tunggal dengan kontak yang biasanya terbuka |
| Menyoroti: | MTL5514D Switch/Proximity Detector Interface,MTL4514D Switch/Proximity Detector Interface,Harsh Environments Switch/Proximity Detector Interface |
||
| Attribute | Value |
|---|---|
| Number of channels | One |
| Location of switch | Zone 0, IIC, T6 hazardous area Div.1, Group A, hazardous location |
| Location of proximity detector | Zone 0, IIC, T4–6 hazardous area, if suitably certified Div.1, Group A, hazardous location |
| Hazardous–area inputs | Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR) |
| Voltage applied to sensor | 7 to 9V dc from 1kΩ ±10% |
| Safe-area output | Two, single pole relays with normally-open contact |
The MTLx514D enables two safe-area loads to be controlled, through relays, by a proximity detector or switch located in a hazardous area. When selected, open or short circuit conditions in the field wiring are detected by the line fault detect (LFD) facility and indicated on the top of the module. Switches are provided to select phase reversal and to enable the line fault detection.
| Specification | MTL4514D | MTL5514D |
|---|---|---|
| Response time | 10ms maximum | 10ms maximum |
| Contact rating (Safe Area) | 10W, 0.5A, 35V dc | 250V ac, 2A, cosØ >0.7, 40V dc, 2A, resistive load |
| Contact rating (Zone 2) | 10W, 0.5A, 35V dc | 35V, 2A, 100VA |
Kontak Person: Ms. Joy chen
Tel: +8615012673027
Faks: 86--15012673027