Mounted Resonant Frequency:Greater than 12 kHz.
Output Bias Voltage:-12 ±3.0 VDC, over temperature referenced to Pin A.
Dynamic Output Impedance:Less than 2400 Ω
Proximitor Sensor Input:Accepts one noncontacting 3300 XL 25 mm Proximity Probe and Extension Cable.
Supply Sensitivity:Less than 2 mV change in output voltage per volt change in input voltage.
Output resistance:50 W
Probe Tip Material:Polyphenylene Sulfide (PPS)
Probe Case Material:AISI 304 stainless steel (SST).
Proximitor Sensor Material:A380 aluminum
Band:Bently Nevada
Model:330130-080-00-CN
Length:8.0 meters (26.2 feet)
Extension Cable Material:75 Ω triaxial, fluoroethylene propylene (FEP) insulated.
Extension Cable Armor (optional):Flexible AISI 302 SST with FEP outer jacket.
Tensile Strength (maximum rated):330 N (75 pounds) probe case to probe lead. 270 N (60 pounds) at probe lead to extension cable connectors.
Mounting Thread:1/4-28 Female
Mounting Torque (Maximum):2 to 5 ft-lb (2.7 to 6.8 N-m)
Sensing Element:Ceramic
Part Number:200151-020-03-02
Model Number:200151-020-03-02
Manufacturer:Bently Nevada
Connectors:MIL-C 5015
Shielded or not:shielded
Cable:20 AWG
Material:75 Ω triaxial, perfluoroalkoxyethylene (PFA) insulated FluidLoc cable.
System Length:5 or 9 extension metres cable including
Probe and Extension Cable Armor (optional):Flexible AISI 302 SST with PFA outer jacket.
Probe Tip Material:Polyphenylene sulfide (PPS).
Polyphenylene sulfide (PPS).:AISI 304 stainless steel (SST).
Proximitor Sensor Material:A380 aluminum
Input:Accepts one non-contacting 3300 RAM or 3300 NSv Proximity Probe and Extension Cable.
Power:Requires -17.5 Vdc to -26 Vdc without barriers at 12 mA maximum consumption, -23 Vdc to -26 Vdc with barriers. Operation at a more positive voltage than -23.5 Vdc can result in reduced linear range.
Supply Sensitivity:Less than 2 mV change in output voltage per volt change in input voltage.
Part Number:200152-25-10
Model Number:200152-25-10
Manufacturer:Bently Nevada